Control Valve Positioner

  • Smart Positioner MSP-31

    Smart Positioner MSP-31

    MSP-31 series Smart Valve Positioner controls the valve opening degree in response to an input signal of 4~20mA from controller or control system. Built-in microprocessor cna control the valve opening degree accurately and realizes the functions of auto set, PID control, HART communication, etc.
  • Mechanical Positioner MEP-10R

    Mechanical Positioner MEP-10R

    MEP-10R Series E/P Positioner MEP-10R series Electric-Pneumatic Positioner controls the valve opening degree in response to an input signal of 4~20mA from controller or control system.
  • Mechanical Positioner MEP-10L

    Mechanical Positioner MEP-10L

    MEP-10L Series E/P Positioner MEP-10L series Electric-Pneumatic Positioner control the valve opening degree in response to an input signal of 4~20mA from controller or control system.
  • Chinese Professional Samson Positioner - Mechanical Positioner MEP-10L – Morc

    Chinese Professional Samson Positioner - Mechanical Positioner MEP-10L – Morc

    Characteristics No resonance between 5 to 200Hz. It is convenient conversion between direct and reverse acting, single and double acting. For small actuator ca be reduce positioner orifice to prevent vibration. Low air consumption. 1/2 split range is available. ​Technical Parameters ITEM / MODEL SINGLE DOUBLE Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 10 to 150mm Impedance 250±15Ω Air Connection PT(NPT)1/4 Gauge Connection PT(NPT...
  • Factory Cheap Hot Metso Positioner - Mechanical Positioner MEP-10L – Morc

    Factory Cheap Hot Metso Positioner - Mechanical Positioner MEP-10L – Morc

    Characteristics No resonance between 5 to 200Hz. It is convenient conversion between direct and reverse acting, single and double acting. For small actuator ca be reduce positioner orifice to prevent vibration. Low air consumption. 1/2 split range is available. ​Technical Parameters ITEM / MODEL SINGLE DOUBLE Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 10 to 150mm Impedance 250±15Ω Air Connection PT(NPT)1/4 Gauge Connection PT(NPT...
  • Good Quality Valve Positioner - Smart Positioner MSP-31 – Morc

    Good Quality Valve Positioner - Smart Positioner MSP-31 – Morc

    MSP-31 Series Positioner Characteristics Nozzle/baffle type resisting moisture, oil and dust. LCD display enables users to monitor the positioner status. PTM module and HART module is available. Various options for flow output setting: Linear, Quick Open, Equal Percentage and Users set (16 point). Easy for calibration and parameter setting. Technical Parameters ITEM / MODEL MSP-31L MSP-31R Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 10 to 150mm ...
  • 2019 China New Design Pneumatic Positioner - Mechanical Positioner MEP-10R – Morc

    2019 China New Design Pneumatic Positioner - Mechanical Positioner MEP-10R – Morc

    Characteristics No resonance between 5 to 200Hz. It is convenient conversion between direct and reverse acting, single and double acting. For small actuator ca be reduce positioner orifice to prevent vibration. Low air consumption. 1/2 split range is available. Technical Parameters ITEM / MODEL SINGLE DOUBLE Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 0°to 90° Impedance 250±15Ω Air Connection PT(NPT)1/4 Gauge Connection PT(NPT)1/8...
  • Chinese wholesale Abb Positioner - Smart Positioner MSP-31 – Morc

    Chinese wholesale Abb Positioner - Smart Positioner MSP-31 – Morc

    MSP-31 Series Positioner Characteristics Nozzle/baffle type resisting moisture, oil and dust. LCD display enables users to monitor the positioner status. PTM module and HART module is available. Various options for flow output setting: Linear, Quick Open, Equal Percentage and Users set (16 point). Easy for calibration and parameter setting. Technical Parameters ITEM / MODEL MSP-31L MSP-31R Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 10 to 150mm ...
  • Chinese Professional Samson Positioner - Mechanical Positioner MEP-10R – Morc

    Chinese Professional Samson Positioner - Mechanical Positioner MEP-10R – Morc

    Characteristics No resonance between 5 to 200Hz. It is convenient conversion between direct and reverse acting, single and double acting. For small actuator ca be reduce positioner orifice to prevent vibration. Low air consumption. 1/2 split range is available. Technical Parameters ITEM / MODEL SINGLE DOUBLE Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 0°to 90° Impedance 250±15Ω Air Connection PT(NPT)1/4 Gauge Connection PT(NPT)1/8...
  • 2019 Good Quality Emerson Positioner - Mechanical Positioner MEP-10R – Morc

    2019 Good Quality Emerson Positioner - Mechanical Positioner MEP-10R – Morc

    Characteristics No resonance between 5 to 200Hz. It is convenient conversion between direct and reverse acting, single and double acting. For small actuator ca be reduce positioner orifice to prevent vibration. Low air consumption. 1/2 split range is available. Technical Parameters ITEM / MODEL SINGLE DOUBLE Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 0°to 90° Impedance 250±15Ω Air Connection PT(NPT)1/4 Gauge Connection PT(NPT)1/8...
  • OEM/ODM China Electric Valve Positioner – Smart Positioner MSP-31 – Morc

    OEM/ODM China Electric Valve Positioner – Smart Positioner MSP-31 – Morc

    MSP-31 Series Positioner Characteristics Nozzle/baffle type resisting moisture, oil and dust. LCD display enables users to monitor the positioner status. PTM module and HART module is available. Various options for flow output setting: Linear, Quick Open, Equal Percentage and Users set (16 point). Easy for calibration and parameter setting. Technical Parameters ITEM / MODEL MSP-31L MSP-31R Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 10 to 150mm ...
  • Factory Cheap Hot Metso Positioner - Smart Positioner MSP-31 – Morc

    Factory Cheap Hot Metso Positioner - Smart Positioner MSP-31 – Morc

    MSP-31 Series Positioner Characteristics Nozzle/baffle type resisting moisture, oil and dust. LCD display enables users to monitor the positioner status. PTM module and HART module is available. Various options for flow output setting: Linear, Quick Open, Equal Percentage and Users set (16 point). Easy for calibration and parameter setting. Technical Parameters ITEM / MODEL MSP-31L MSP-31R Input Signal 4 to 20mA Supply Pressure 0.14 to 0.7MPa Stroke 10 to 150mm ...
123456 Next > >> Page 1 / 6